Auto Release Heat Press Machine T-Shirt Sublimation Transfer Pressing Machine
|FOB Price:||US $250 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $250/ Piece|
|Production Capacity:||1000 PCS/Month|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: CY-G6
- Transport Package: with Foam Inside, Hard Carton &Wooden Case Outside
- Origin: Guangdong Province, China.
- Trademark: SHENGHUA
- Specification: 38*38cm, 40*50cm, 40*60cm
- HS Code: 8443198000
Model No: CY-G6
Working Size: 38*38CM/40*50CM/40*60CM
Time range: Adjustable
Temperature range: 0-600 degrees Fahrenheit
Packing: Strong corrugated box with foam inside
1. Open the machine, Plug in and ture on the power switch, the red flight will illuminate.
2. Adjust the "time and temperature controller" to set the right time and temperature needed for heat transfer (Normally 248F-392F/ 120-200degree).
3. Adjust the "Using Pressure adjuster" to set the using pressure.
4. Adjust the " Eccentricity pressure adjuster " to set eccentricity pressure
5. Place the cloth on the down board, cover the printing paper, (please note the right surface of the paper), when the temperature ready, press the handle down. (Please note the pressure should be no more than 30KG in case the handle will be distorted)
6. The Eccentricity pressure directly affect the heat plate can open automatic or not, please pay attention to the distinction of the using pressure with it, Regulation of the two pressures are complementary.
7. When the time over, the upper heat plate will open automatically.
1. Digital 2in1 time and temperature controller.
2. Aluminium heat plate, Heating uniformity on the surface.
3. Teflon coated on the heat plate, convenient and attractive appearance.
4. Signal indicator when transfer press finish.
5. The pressure can be adjust easily
6. U design: T-shirt can wear on the machine directly.
7. The silicon pad can endure maximum 350 degree without any distortion
8. When the time over, the upper heat plate will open automatically
1. If the top heat plate can't open when time over?
Plealse Knob clockwise the "eccentricity pressure adjuster" until it can open.
(Note: When adjust the eccentricity pressure, you can adjust the using pressure together with adjustment )
2. If the machine can't close?
Please Knob Conter-clockwise the "eccentricity pressure adjuster" and the "using pressure adjuster " together until it can close.
If still can't solve the problem, please check if the electric magnet is magnetic when open and close the heat plate. You can use a iron to check. If it is no magnetic please check the circuit. Or contact us.
3. If the pressure is not enough or too large, please adjust pressure adjuster, (+) to increase the pressure, (-) to reduce the pressure
4. If the printed color not equality or the adhesion not good?
First check the right set of temperature and the time, and increase the pressure
7. If it is cold-ripping transfer paper, please use blackboard wiper to rub against the whole transfer paper, wait for 5-10secs, then rip off the transfer paper. If it is the hot-ripping tranfer paper, you can rip off immediately after printing.
Please note successful print requires right time and temperature and pressure, the thinkness and material of the cloth, even type of transfer paper and inks.
Read before operating:
1. Be sure to operate with safe ground wire! ! !
2. Check the voltage before using it. Turn off the machine and cut off the power suspply.
3. When using the machine, please don't heat the machine without operating it for long time. When finish transfer press, please turn off the machine.
4. When heating the machine, don't touch the up heat plate in case of scald.
5. When you press the handle, if you feel the pressure is too much and hard to press it, please adjust the using pressure by hand.
6. Keep children away from the machine.
7. Never transfer press other things not suitable the machine with the heat plate.
|Voltage||110V/60Hz & 220V/50Hz|
|Working Area||38*38CM/16"*16" ||40*50CM/16"*20"||40*60CM/16"*24"|